High purity piping is NOT plumbing. The tubing, system components, fittings, and equipment, are specially cleaned, treated, handled, and packaged to ensure quality. Since the items can prove to be costly, it's important that they are handled and installed by professionals. When you invest in a cylinder gas, or a water purification system that has been certified, and guaranteed to contain specific maximum or minimum levels of impurities and/or additives, you need to be confident that those levels are maintained from the source of supply to the point of use. It's important to build a system that meets or exceeds the integrity of the process. This is where the old adage, “A chain is only as strong as it's weakest link”, applies.

No two systems are alike. Each and every one is unique to the requirements of the process being performed. Our knowledgeable staff will help you design a system that is compatible to your specific needs, as efficiently and cost effectively as possible.

Ultra-high purity:
Used when a process requires the control of sub-micron particles to < 10 and < 10 ppm moisture. These systems typically serve the semi-conductor industry, and commonly deliver spectrographic grade gases which are certified to 99.999 and higher purity levels. This type of system is 100% orbitaly welded, and strict handling protocol is practiced during the entire assembly phase.

Dual containment:
Used when ultra-high purity is a must and hazardous gases are involved. These systems include redundant safety features due to the hazardous nature of the gas. also 100% orbitally welded.

Single carrier:
Also Used when ultra high purity is a must but the gases involved are considered as inert or non-hazardous. also 100% orbitally welded.

High purity:
Used when a process requires gases from 99.9 to 99.99 pure, but does not the standards of an ultra-high purity system. These can be hand bent and welded, and include compression fittings depending on the application.

Facility and control systems:
Constructed of hand bent tubing and compression fittings, these systems are used to deliver products such as de-ionized water, house nitrogen, house vacuum, control air, and PCWR & S to various controls, holding devices, gloveboxs and cooling applications.

Clean for oxygen service copper:
Used where larger volumes of gas are required. Primarily laser cutting and arc sheilding applications, these are built using special coppoer tubing, and brazing techniques that guarantee clean, oxidation free, joints on the I.D. of the tube.

An operating infrastructure that is free of contaminants can be the key to success, and Infinity High Purity Systems has the knowledge, experience and ability, to control micro-contamination in your process systems, in turn giving you the ability to run your business with…a cleaner state of confidence!